Product Details

VISTA is one of the best withdrawal sleeves for metric dimensions manufacturers and suppliers. With withdrawal sleeves for metric dimensions for sale, you are able to buy cheap products directly through our website.

Withdrawal sleeves can be used to mount bearings with a tapered bore on the cylindrical seat of stepped shafts (fig.1)The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or end plates are not supplied with withdrawal sleeves. KM or HM lock nuts (→Lock nuts)with appropriate locking devices are suitable, but must be ordered separately.

 fig. 1

To press the withdrawal sleeve into the bearing bore, a considerable amount of force is required to overcome the friction between the bearing, sleeve and shaft. To facilitate mounting and dismounting bearings on withdrawal sleeves, SKF recommends using a hydraulic nut (fig.2).

 fig. 2