- Truck Brake Spring
- 2017-12-20 21:58
- This is applied to heavy truck brake and it is made by CNC with on time forming, the surface treatment is electrophoresis or zinc-plating.
- Auto Suspension Spring
- 2017-12-12 18:19
- This is applied to Auto Shock Absorber, we have more than 300 OEM numbers now and all are made by CNC to guarantee the quality and service life, the main material used is 55CrSi.
- Precision Extension Spring
- 2017-12-08 14:59
- This is applied to electronic components ,Small machinery equipments, the wire diameter is between 0.3mm and 1.0mm.
- Hight Temperature Resistance Disc Spring
- 2017-11-25 22:40
- It is mainly applied to machinery parts of valves or steel plants and it is made with superalloy with a good working performance under high temperature environment.
- Engine Valve Spring
- 2017-10-29 23:18
- This is made by CNC to ensure the consistency of the spring’s workload, and also with the technique of shot blasting to guarantee the service life to be more than 25 million times.
- Leaf Spring
- 2017-10-23 23:16
- This is applied to electronic appliance and Auto parts, the thickness is between 0.3mm and 5mm and the main material used are 65Mn,50CrVA, 60Si2MnA, SUS304L and SUS316L.
- Refitted Vehicle Suspension Spring
- 2017-10-21 00:01
- This is improved on the basis of original spring in order to increase the length and elasticity. It is made with a high grade wire to improve its performance and this can be customized according to requirements.
- Variable-rate Suspension Spring
- 2017-10-15 01:42
- This is applied to the vehicle which has special requirement for damping performance, it is made by special moulds with special material, the wire used is taper in both ends and fat in central.
- Plane Spiral Spring
- 2017-09-26 09:26
- It is applied to Auto parts and starter Accessories. The main material used are 65Mn, 60Si2Ma and 50CrVA.
- Standed Wire Spring
- 2017-09-24 05:48
- It is mainly applied to important parts, which can effectively solve the effect of impact load on the spring with a long service life.
- Wave Spring
- 2017-09-20 10:20
- It is applied to electric machinery and hydraulic equipment, the HRC is between 44 and 46 and the main material used are 65Mn, 50CrVA, 0Cr17Ni7AL, SUS304L and SUS316L.
- Shaped Torsion Spring
- 2017-09-13 15:01
- This is made by multifunctional CNC and we can produce complex shaped spring, and the material used are Carbon steel wire, alloy steel wire and stainless steel wire, etc.
- Harvester Spring
- 2017-09-12 03:08
- It is mainly applied to all kinds of harvester, the surface treatment are electrophoresis, spraying plating, zinc-plating.
- Common Compression Spring
- 2017-09-05 22:28
- This is applied to Auto parts, Hardware, electrical appliances and Mechanical equipment, it is made by CNC to ensure its accuracy. And the material used are Carbon steel wire, Alloy wire and stainless steel etc, the wire diameter is between 0.2mm and 20mm
- Galvanized Spring
- 2017-09-01 05:54
- Plating coating on common spring ‘s surface to improve the quality of the surface and also increase the anti-rusty ability.
- Stainless Steel Disc Spring
- 2017-08-24 17:51
- This is made with stainless steel 316L and 304L, It can be applied to poor working environment to increase the anti-rust service life.
- Die Spring Series
- 2017-08-19 08:25
- It is mainly applied to mold and is made with rectangular wire, which is has large stiffness than round wire spring and also has the characteristic of small occupied space.
- High Temperature Resistant Spring
- 2017-08-18 11:30
- This kind of spring is made with Inconel x-750 and Inconel x-718, it can be high temperature resistance of 700 degree and also corrosion resistance, it has a high Fatigue resistance.
