- SpO2 probe sensor LED660/940
- 2017-12-16 11:25
-
Model Number: S-SPO2-0006
Brand Name: Tosense
Key Specifications/Special Features:
Dual chip light-emitting diode used for SpO2 and Pulse measuring 660/940Application: SpO2 Measuring device,SpO2 Pulse Oxymeter, Beauty machine, etc.
...
- SpO2 probe sensor receiving tube
- 2017-11-10 01:56
-
Model Number: S-SPO2-0007
Brand Name: Tosense
Key Specifications/Special Features:
SpO2 probe sensor dual wavelength infrared receiving tube typical circuit.The appearance and parameters refer to the pictures
Shipping Information:
...
- TSL237S-LF Light-to-Frequency Converter
- 2017-10-14 12:09
-
Model Number: S-SPO2-0004
Brand Name: TAOS
Key Specifications/Special Features:
DescriptionThe TSL237 light-to-frequency converter combines a silicon photodiode and a current-to-frequency converteron a single monolithic CMOS integrated circuit. ...
- NJL5501R Reflection type oxygen sensor 660/940
- 2017-09-15 22:22
-
Model Number: S-SPO2-0009
Brand Name: JRC
Key Specifications/Special Features:
COBP photo reflector with red & IR LEDGeneral descriptionThe NJL5501R is the compact surface mount type photo reflector, which is built in a RED LED, infrared L...
- SpO2 Acquisition Module
- 2017-08-29 09:07
-
Model Number: S-SPO2-0003
Brand Name: Tosense
Key Specifications/Special Features:
FeatureMinimum size, the cheapest SpO2 module, three-piece suit, with half hole on the edge, this module can be directly welded on your PCB board. Have technical ...
- SpO2 probe sensor LED660/905
- 2017-08-23 19:15
-
Model Number: S-SPO2-0005
Brand Name: Tosense
Key Specifications/Special Features:
SpO2 probe sensor dual wavelength red & infrared LED660/905 , peak wavelength is 660/905, transparent resin encapsulation, side light, appearance size: 4 * ...
- 3D Printer Pen with Stand
- 2017-07-11 22:16
-
Model Number: S-3DP-0008
Brand Name: Tosense
Key Specifications/Special Features:
3D printer pen with standUser manual1. Connect with power or power bank2. Press button 1, light will be red and 3D pen head heating3. Select ABS/PLA mode button4. ...
